Bobcat Company 442 — Removal And Installation

LEFT CONSOLE Figure 40-50-7 Removal And Installation The cab must be removed or raised approximately 24” (610 mm) to remove the left console. (See CAB on Page 40-20-1.) 1 Figure 40-50-5 1 1 2 P-61458 Lower the console and remove the two screws (Item 1). Remove the cover (Item 2) [Figure 40-50-7] . 1 1 Figure 40-50-8 P-61456 Install blocks (Item 1) [Figure 40-50-5] to support the cab if the cab is not removed. Figure 40-50-6 1 1 1 P-61459 Remove the six hoses (Item 1) [Figure 40-50-8] from the joystick. 1 1 NOTE: Mark the hoses for correct installation. P-61457 Remove the five screws (Item 1) [Figure 40-50-6] . 442 Excavator 40-50-1 Service Manual