Bobcat Company 442 — LUBRICATION OF THE EXCAVATOR

LUBRICATION OF THE EXCAVATOR Figure 10-110-3 Lubricate the excavator as specified in the Service Schedule for the best performance of the machine. (See SERVICE SCHEDULE on Page 10-50-1.) Always use a good quality lithium based multipurpose grease when lubricating the machine. Apply the lubricant until extra grease shows. 7 Lubricate the following locations on the excavator EVERY 8-10 HOURS: Figure 10-110-1 P-32869 1 7. Boom pivot (1) [Figure 10-110-3] 3 Figure 10-110-4 2 P-32866 8 1. Right blade cylinder rod end (1) [Figure 10-110-1] 2. Right blade cylinder base end (1) [Figure 10-110-1] 3. Right side blade pivot (1) [Figure 10-110-1] Figure 10-110-2 P-32868 4 8.

Boom swing pivot (2) [Figure 10-110-4] 6 5 P-32867 4. Left blade cylinder rod end (1) [Figure 10-110-2] 5. Left blade cylinder base end (1) [Figure 10-110-2] 6. Left side blade pivot (1) [Figure 10-110-2] 442 Excavator 10-110-1 Service Manual