SWING FRAME (CONT’D) Figure 40-100-15 Removal And Installation (Cont’d) Figure 40-100-13 1 1 1 P-38479 2 Mark and remove the shims (Item 1) [Figure 40-100-15] from the bottom of the swing frame. P-38477 As the lower pin (Item 1) is being removed, reposition the hoses (Item 2) [Figure 40-100-13] to gain pin clearance. NOTE: The top and bottom of the swing bracket uses three different shim thickness. Remove the lower pin. 0.079 inch (2 mm) 0.098 inch (2.5 mm) 0.118 inch (3 mm) Separate the swing frame from the excavator. Figure 40-100-14 Figure 40-100-16 1 2 1 1 2 1 P-38480 P-38478 Mark and remove the shims (Item 1) [Figure 40-100-14] from the top of the swing frame.
Pull the swing frame (Item 1) away from the excavator and remove the hoses (Item 2) [Figure 40-100-16] from the swing frame. 442 Excavator 40-100-4 Service Manual