ARM Figure 40-170-3 Removal And Installation Remove the bucket. (See BUCKET on Page 40-140-1.) 1 Lower the boom/arm to the ground. Figure 40-170-1 1 P-38236 Remove the bucket/auxiliary hoses (Item 1) [Figure 40- 170-2] & [Figure 40-170-3] from both sides of the boom. P-382733 Support the boom with a chain hoist (Item 1) [Figure 40- 170-1] . With the engine off, the start key in the run position and the left console lowered, move the joysticks to relieve hydraulic pressure. Figure 40-170-2 1 1 P-38237 442 Excavator 40-130-1 Service Manual