ALTERNATOR BELT Figure 10-130-2 Adjusting Belt Tension Check the alternator belt deflection at the mid span of the belt between the crankshaft pulley and alternator pulley. Apply approximately 33 lb. (15 Kg) force to the belt. The belt should deflect 0.40 inches (10 mm). Figure 10-130-1 1 1 1 B-16596 P-32846 Loosen the three alternator mount bolts (Item 1) [Figure 10-130-1] & (Item 1) [Figure 10-130-2] and rotate the alternator until the belt is correctly tensioned. Tighten the bolts. 442 Excavator 10-130-1 Service Manual