FAN/FUEL PUMP BELT Figure 10-140-2 Adjusting Belt Tension (S/N 522311001 & Above) Figure 10-140-1 1 1 1 P-32845 Check the fan/fuel pump belt deflection mid span of the belt between the crankshaft pulley and the fuel pump pulley (Item 1) [Figure 10-140-1] . B-16596 Loosen the two bolts (Item 1) [Figure 10-140-2] on the fuel pump mount. Rotate the fuel pump until the belt is correctly tensioned. Apply approximately 33 lb. (15 Kg) force to the belt. The belt should deflect 0.40 inches (10 mm). Tighten the bolts. 442 Excavator 10-140-1 Service Manual