Bobcat Company 442 — Adjusting Belt Tension

AIR CONDITIONING COMPRESSOR BELT (S/N 522311001 & ABOVE) Figure 10-150-2 Adjusting Belt Tension Figure 10-150-1 2 1 1 P-40475 P-40348 1 Loosen the two bolts (Item 1) [Figure 10-150-2] and nuts. Loosen the bracket bolt (Item 2) [Figure 10-150-2] . Rotate the compressor until the belt is correctly tensioned. Check the A/C belt deflection at the mid span of the belt (Item 1) [Figure 10-150-1] . Tighten the bolts. Apply approximately 33 lb. (15 Kg) force to the belt. The belt should deflect 0.40 inches (10 mm). 442 Excavator 10-150-1 Service Manual