Bobcat Company 442 — Disassembly (All Models)

STARTER (CONT’D) Figure 50-40-19 Disassembly (All Models) (Cont’d) Figure 50-40-17 1 P-63333 1 Install the tube (Item 1) [Figure 50-40-19] over the retainer, and tap gently. P-63328 Remove the pinion (Item 1) [Figure 50-40-17] . Figure 50-40-20 Figure 50-40-18 2 1.5” (38 mm) 1 P-63334 0.675” (17 mm) Press the collar (Item 1) down to gain access to the snap ring (Item 2) [Figure 50-40-20] . P-63335 In order to remove the snap ring from the pinion shaft, a tube 0.675 inches (17 mm) in diameter by 1.5 inches (38 mm) in length is needed [Figure 50-40-18] . Remove the snap ring. 442 Excavator 50-40-7 Service Manual