Bobcat Company 442 — Disassembly And Assembly

FRONT CAB LIGHT (CONT’D) Figure 50-50-9 Disassembly And Assembly (Cont’d) Figure 50-50-7 1 P-36360 1 2 Squeeze the ends of the retainer clip (Item 1) [Figure 50- 50-9] and pivot the retainer clip to the side. P-36357 Remove the four screws (Item 1) and cover (Item 2) [Figure 50-50-7] . Figure 50-50-10 1 Figure 50-50-8 3 1 2 P-36362 Remove the bulb (Item 1) [Figure 50-50-10] . P-36359 NOTE: Do not touch the bulb. If the bulb needs to be cleaned use a clean lint free cloth. Any dirt or oil on the bulb will shorten the service life of the bulb. Disconnect the red wire (Item 1) from the white wire (Item 2). Remove the black wire (Item 3) [Figure 50-50-8] from the housing.

442 Excavator 50-50-3 Service Manual