RADIATOR/OIL COOLER (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) Figure 60-41-3 Removal And Installation Drain the hydraulic reservoir. (See Replacing The Hydraulic Oil on Page 10-100-2.) Drain the engine oil. (See Replacing Oil And Filter on Page 10-90-2.) 1 Figure 60-41-1 1 2 P-58451 Install the drain hose (Item 1) [Figure 60-41-3] . Tighten the hose until oil starts to drain from the radiator. 1 1 1 1 IMPORTANT P-38640 When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system.
Remove the eleven bolts (Item 1) [Figure 60-41-1] and washers. Remove the cover (Item 2) [Figure 60-41-1] . I-2003-0888 Figure 60-41-2 1 P-58450 Remove the cap (Item 1) [Figure 60-41-2] from the bottom of the cooler. 442 Excavator 60-41-1 Service Manual