CAB TILT PROCEDURE (CONT’D) Figure 10-160-11 Tilting The Cab (Cont’d) 1 2 Figure 10-160-9 1 1 1 1 P-33042 Remove the 11 bolts (Item 1) and washers. Remove the bottom cover (Item 2) [Figure 10-160-11] P-33037 Figure 10-160-10 Installation: Tighten the bolts to 18-19 ft.-lb. (110-125 N•m) torque. 1 P-33038 Remove the rear cab mount nuts (Item 1) [Figure 10- 160-9] & [Figure 10-160-10] and washers. Installation: Tighten the nuts to 81-92 ft.-lb. (110-125 N•m) torque. 442 Excavator 10-160-3 Service Manual