ENGINE COMPONENTS AND TESTING (S/N 522311001 & ABOVE) (CONT’D) Remove the fuel injector lines from the fuel pump and fuel injectors [Figure 60-50-14] . Fuel Injection Pump Removal Installation: Preload the injector cap nuts to 4 ft.-lb. (5 N•m). Final tighten the bolts to 18-21 ft.-lb. (25-28,5 N•m) torque. IMPORTANT NOTE: Do not rebend or reuse fuel injector lines. Do not attempt to maintain or adjust unless you are trained and have the correct equipment. Figure 60-50-15 I-2028-0289 The injection pump(s) contain parts which have a very close tolerance and its operation has a direct effect on the performance of the engine. Figure 60-50-13 P-63093 Remove the bolts [Figure 60-50-15] .
P-63087 Remove the valve cover [Figure 60-50-13] . Installation: Tighten the bolts to 6-7 ft.-lb. (8-10 N•m) torque. Figure 60-50-14 P-63089 442 Excavator 60-50-7 Service Manual