Bobcat Company 442 — Removal And Installation

ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-61-15 Removal And Installation (Cont’d) Figure 60-61-13 2 2 2 1 2 2 1 2 2 P-58682 2 Remove the nut, washer, and positive (+) battery cable (Item 1) from the starter. Remove the three cable ties (Item 2) [Figure 60-61-15] from the back side of the engine block. P-58680 Loosen the clamps (Item 1) and remove the air intake hose. Remove the cable ties (Item 2) [Figure 60-61-13] . Figure 60-61-16 NOTE: Plug the air intake to prevent contamination from entering the engine. Figure 60-61-14 1 1 P-58684 Remove the front two engine mount bolts (Item 2) [Figure 60-61-16] . Installation: Tighten the bolts to 48-55 ft.-lb.

(65-75 N•m) torque. P-58681 Remove the cable tie (Item 1) [Figure 60-61-14] from the A/C wire harness. 442 Excavator 60-61-4 Service Manual