Bobcat Company 442 — Removal And Installation

FLYWHEEL (S/N 522311001 & ABOVE) Figure 60-70-3 Removal And Installation 1 Remove the engine. (See ENGINE (S/N 522311001 & ABOVE) on Page 60-60-1.) Mark the flywheel cover to engine block for ease of assembly. Figure 60-70-1 1 1 P-38181 1 1 Remove the plugs (Item 1) [Figure 60-70-3] . 1 Mark the flywheel to crankshaft. 1 1 Figure 60-70-4 P-38272 1 1 Remove the nine bolts (Item 1) [Figure 60-70-1] . Installation: Apply medium strength thread adhesive (Loctite™ 242) to the bolt threads. Tighten the bolts to 33 ft.-lb. (45 N•m) torque. 1 Figure 60-70-2 1 1 P-38180 1 2 Remove the bolts (Item 1) [Figure 60-70-4] . Installation: Tighten the bolts as follows: 1 10. 30-45 mm long 15-22 ft.-lb.

(20-30 N•m) 50-85 mm long 22-30 ft.-lb. (30-40 N•m) 1 1 11. 60° 12. 30 mm long 30° 35-85 mm long 60° P-38182 Remove the bolts (Item 1) and pump coupler (Item 2) [Figure 60-70-2] . Remove the flywheel. Installation: Apply medium strength thread adhesive (Loctite™ 242) to the bolt threads. Tighten the bolts to 36 ft.-lb. (49 N•m) torque. 442 Excavator 60-70-1 Service Manual