Bobcat Company 442 — Removal And Installation

FLYWHEEL (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) Installation: Apply thread adhesive (Loctite™ 242) to the bolt threads. Tighten the bolts to 15-18 ft.-lb. (20-25 N•m) torque. Removal And Installation Remove the muffler and muffler mount. (See MUFFLER (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) on Page 60-21-1). Mark the flywheel to crankshaft. Figure 60-71-3 Remove the hydraulic piston pump. (See Removal And Installation on Page 20-52-13.) 1 1 Mark the flywheel cover to engine block for ease of assembly. Figure 60-71-1 1 1 P-58649 1 1 Remove the bolts (Item 1) [Figure 60-71-3] . Installation: Do not reuse the bolts. Install new bolts and tighten the bolts to 22 ft.-lb.

(30 N•m) torque. 1 1 P-58646 Torque the bolts an additional 60Ч. Final torque the bolts an additional 30Ч. Remove the eight bolts (Item 1) [Figure 60-71-1] . Remove the flywheel. Installation: Apply thread adhesive (Loctite™ 242) to the bolt threads. Tighten the bolts to 30-37 ft.-lb. (40-50 N•m) torque. Figure 60-71-2 1 2 1 1 P-58648 Remove the bolts (Item 1) and pump coupler (Item 2) [Figure 60-71-2] . 442 Excavator 60-71-1 Service Manual