RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-1 Disassembly Remove the engine. Mount the engine on a suitable engine stand. Remove the starter. (See Removal And Installation (S/N 522311001 & Above) on Page 50-40-1.) Remove the alternator. (See Removal And Installation (S/ N 522311001 & Above) on Page 50-30-1.) Drain the oil from the engine oil pan. P-61844 Remove the turbocharger. See “Turbo Charger Removal and Installation” on page 72. Remove the shut off solenoid. Remove the rocker arms and brackets [Figure 60-80-1] . Figure 60-80-2 Remove the fuel injectors. (See Fuel Injection Pump Removal on Page 60-50-7.) Remove the overflow valve. Remove the exhaust manifold.
Remove the intake manifold. Remove the oil filter. Remove the fuel filter. Remove the fuel pump. P-61845 Remove the water pump. Remove the oil cooler. Remove the push rods [Figure 60-80-2] . Remove the valve cover. Figure 60-80-3 Remove the glow plugs. P-61846 Remove the air intake manifold [Figure 60-80-3] . 442 Excavator 60-80-2 Service Manual