Drive - 60 HT220 Operator’s Manual Drive Drive EMERGENCY SHUTDOWN : Press the emergency stop button to stop. 1. Verify that parking brake is disengaged. 2. Adjust throttle to about half way. 3. Adjust boom lift switch to raise boom. 4. Adjust the direction control lever to move unit forward or backward. 5. Adjust steering control lever to adjust the direction. 6. Change engine speed with throttle. Moving traffic – hazardous situation. Death or serious injury could result. Avoid moving vehicles, wear high visibility clothing, post appropriate warning signs. NOTICE: Drive carefully in congested areas. Know machine’s clearance and turning radius.
Rollover possible – If machine rolls over, you could be thrown from seat and killed or crushed. Wear seat belt. NOTICE: Keep attachments low when operating on slope. Drive slowly and cautiously. Shut Down 1. Move direction control levers to the neutral position. 2. Lower boom to ground. 3. Engage parking brake. 4. Reduce engine speed to a minimum. 5. Wait five minutes for engine to cool down. 6. Turn ignition switch to STOP. 7. Turn off the air conditioner and the lights, if on. 8. If leaving the machine unattended, remove key and lock the following: cab window, door, engine compartment doors, tool compartment door and the tank locking caps. CMW