Maintenance Replacement Parts Fuel pumps, relays, filter, and related parts. WARNING! Improper parts substitution can result in fire or explosion. Rubber caps (manifold), hoses (water and exhaust), and attaching clamps. Use genuine Volvo Penta parts when replacement parts are needed. Volvo Penta replacement parts are designed to meet USCG requirements and ABYC standards for marine applications. Fuel injector O-rings, injector fuel line pressure relief valve and caps, fuel reservoir vent hose and cover gasket, high pressure fuel pump mounting O-rings, fuel pressure regulator, and fuel rails.
Failure to use genuine Volvo Penta parts may result in product malfunction and possible injury to the opera- tor and/or passengers. Your Volvo Penta product was designed to operate in a marine environment. This can involve operating: In your Volvo Penta product, certain fuel and electrical system components have been designed to comply with U.S. Coast Guard regulations. Parts or compo- nents that comply with these regulations are designed so they will not emit fuel vapors or cause ignition of fuel vapors in the engine compartment. At high RPM for long periods. In salt or brackish water. In water laden with silt and minerals.
Substituting automotive or generally supplied parts and hardware may result in product malfunction and possible injury to the operator and/or passengers. Never use parts of unknown quality. See your Volvo Penta dealer. You can depend on your dealer to fur- nish expert service and Volvo Penta parts. To prevent explosion or fire, do not substitute automo- tive or general hardware parts for the following: 7743722 - Downloaded from www.volvopenta.com 13/05/2008 20:17:06 Circuit breakers, alternator, and related wiring. Starter and related wiring. Distributor, distributor cap, spark plugs, high ten- sion leads, and related ignition parts. VPA 7743722 English 10-2004 101