SECTION 6 SPECIFICATIONS Page 4 TECHNICAL DESCRIPTION Drive train: The drive train includes the following components: Engine with Radiator Torque Converter Universal Joint Transmission Pinion / Bevel Gear Set and Steering Drive Final Drives Engine power is transmitted thru a torque converter, universal joint, transmission, pinion/bevel gear set and steering drive to two final drives with mounted sprockets. A three-speed powershift transmission combined with two-speed steering gives six speeds forward and six speeds reverse or when combined with one-speed steering gives three speeds forward and three speeds reverse.
Steering is accomplished by the application of clutch packs in the steering drive. Hydraulics of transmission system The transmission system includes an oil tank which is the rear frame, suction filter, torque converter mounted pump, pressure filter, main regulator valve, rate of rise valve, range selector valve and transmission and steering drive control valves. Mounted equipment Semi-U Blade with beams and tilt cylinder (model D-2) Diagonal Blade with C-frame and tilt cylinders (model G-2) Straight Blade for LGP machines Drawbar Multi-shank ripper – max.
5 shanks, tool beam raised and lowered with hydraulic cylinder, ripper shanks can be adjusted in two vertical positions for shallow and deep penetration. Fixed drawbar with vertical pin. Equipment hydraulic system The equipment hydraulic system consists of a hydraulic reservoir with a sight gauge and breather, and suction filter, hydraulic pump, control valve with a pressure relief valve supplying hydraulic cylinders, quick drop valve and pressure filter. DRESSTA TD-15H