DRESSTA Co. Ltd. TD-15H — 6.3.3. TRACKS

SECTION 6 SPECIFICATIONS Page 6 SPECIFICATIONS K. Blade tilt - straight blade (Model D-2) . . . . . . . . . . . . . . . . . . . . . . . . . 724 - angled blade (Model G-2) . . . . . . . . . . . . . . . . . . . . . . . . . . 381 K1. Blade angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 [ ° ] K2. Max. pitching angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 [ ° ] L. Ripper shank: - length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2130 - section (height x width) . . . . . . . . . . . . . . . . . . . . . . . . . . . 229x254 - clearance under shank with lowered shank . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . 114 with raised shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1030 number of pockets / ripper teeth . . . . . . . . . . . . . . . . . . . . . . . . . 5/5 Maximum teeth penetration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528 Clearance with fully raised tooth . . . . . . . . . . . . . . . . . . . . . . . . 503 Ripper weight with one tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . 1530 [kg] Tooth weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 [kg] 6.3.2. REFILL CAPACITES Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

388 liters Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 liters Crankcase with filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 liters Transmission system (RMF) . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 liters Rear Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 liters Final drive (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 liters Track roller (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4 liter Track idler (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0.4 liter Front idler (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 liter Track chain link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03 liters Pivot shaft reservoir (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 liters Equipment hydraulic system: Model D-2 (Equipped with hydraulic tilt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 liters Model D-2 Blade & Ripper (Equipped with hydraulic tilt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 liters Model G-2 (Equipped with hydraulic tilt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 liters Hydraulic reservoir .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 liters Air conditioning refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.22 [kg] Track chains, track rollers, track idlers and front idlers are permanently lubricated with SAE 30 engine oil, lubricated track chain links are permanently lubricated with SAE 85 W multi-purpose lubricant when assembled and do not require any additional lubrication except when reconditioned. 6.3.3. TRACKS Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1880 [mm] STD&LT Track on ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2635 [mm] & 2940 [mm] LT Track shoe width, standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510 [mm] Track shoe width, max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660 [mm] Number of track shoes per each side . . . . . . . . . . . . . . . . . . . . . 39 for STD & 42 for LT DRESSTA TD-15H