SECTION 4 OPERATING Page 18 STARTING THE ENGINE 1. Brake and Decelerator Pedal and Brake Lock Knob 2. Ether Start Button 3. Engine Coolant Gauge and Light 4. Engine Oil Pressure Gauge and Light 5. Horn Button 6. Start Switch Button 7. Electric system Master Switch 8. Transmission Shift Lever 9. Engine Speed and Shut Down Lever 10. Transmission Neutral Lock Lever Fig. 4.15. Starting the Engine WARNING! Never start the engine indoors unless proper exhaust ventilation is provided to remove deadly exhaust gases. Once the engine is running, move the machine outdoors as soon as possible. Exhaust gases are hazardous and can cause unconsciousness and death. WARNING!
Be sure all personnel are clear of the machine before starting the engine. Sound the horn. WARNING! Make sure the operator’s seat is adjusted properly and fasten the safety seat belt. 4.6.1. NORMAL START (temperature above 0 [°C]) (Fig. 4.15) 1. Apply and lock the brake and decelerator pedal. 2. Place transmission shift levers (8) in neutral. 3. Place the neutral lock lever (10) in vertical “ON” position. 4. Move the engine speed control lever (9) to low speed (idle) position (Fig. 4.16). 5. Turn on electric system master switch “ON”. TD-15H DRESSTA