SECTION 5 MAINTENANCE Page 10 MAINTENANCE AND SERVICE CHART EO1: Engine Oil per HMS B21-0002 or multi-grade diesel engine oil CF-4/SG per API, MIL–L–2104D with sulfated ash of 1.85% maximum. *EO2: Multi – purpose engine oil per HMS B21-0003 or engine oil CD per API MIL-L-2104C passing TO-2 and C-3 test with 0.10% minimum zinc. EO: Arctic selection: multi-purpose oil per HMS B21-0001or MIL-L-46167 MPL: Multi – purpose gear lubricant per HMS B22-0003 or API GL-5, MIL-L-2105C Arctic selection: grade 75 per HMS B22-0003 MPG: Multi – purpose grease 251 HEPM per HMS B27-0002 or NLGI grade #2 multi-purpose lithium grease with 3% minimum molybdenum disulfide (MoS 2 ). Arctic selection:
per HMS B27-0003 or MIL-L-10924D ANTI-FREEZE: Single Phase, ethylene glycol base per HMS B01-0001. DIESEL FUEL: Per HMS B32-0001 or ASTM D-975 Arctic selection: per VV-F-800DF-A 5.4. LUBRICATION 5.4.1. WHEN SHIPPED This machine has been lubricated at the factory for operation in an air temperature range of +21[ ° C] to – 23[°C]. If this tractor is to be operated above or below this range, change to the correct lubricants. Unless an exception is shown below, all lubricants can be used (within above temperature range) until regular scheduled (normal) change intervals occur.
Refer to "MAINTENANCE AND SERVICE CHART" for the scheduled (normal) change intervals and to "REFILL SPECIFICATIONS AND CAPACITIES CHART" for the proper oil grades for ambient temperatures. Front idlers, track idlers and track rollers are permanently lubricated with a SAE 30, API CD or MIL-L-2104C engine oil. A level check of these compartments is not required. Lubricated track chain links are permanently lubricated with SAE 85 W multi-purpose lubricant. 5.4.2. WHEN SERVICED WARNING! When you service the machine, always follow the Operator's or Service Manual. Never grease, oil or perform any maintenance alone with the engine running.
Always have another experienced person helping in the operator's compartment when maintenance must be done with the engine running. Block up all attachments securely. Do not leave the operator's seat with the engine running. Failure to follow these instructions could result in serious injury or death. TD-15H DRESSTA