Peterbilt Conventional Truck Series — Door Mounted Controls

SWITCHES Mirror Heat Button Adjusting the mirror switch back to the center (neutral) position to prevent unintentional adjustments to the mirrors. Your vehicle may be equipped with optional heated mirrors. Mirror heat is controlled by the mirror heat switch button, which is part of the mirror switch module located on the driver side door pad. If your vehicle is equipped with power mirrors, the directional controls for both mirrors are located near the top of the driver side door trim pad. 1. Move the mirror selector switch to the right or left from the neutral center position to select the desired mirror for adjustment. 3 2.

Depress the mirror directional control pad in one of its four arrow directions to adjust the mirror in/out or up/down. NOTE After mirror adjustments have been completed, return the mirror selec- tor switch back to the center (neu- tral) position to prevent unintentional adjustments to the mirrors. After mirror adjustments have been completed, return the mirror selector 3-70 Y53-6076-1B1 (03/17)