Peterbilt Conventional Truck Series — Fuse or Relay Blows

WHAT TO DO IF... 7. If overheating came from severe operating conditions, the temperature should have cooled by this time. If it has not, stop the engine and let it cool before checking to see if the coolant is low. WARNING! Fuse or Relay Blows To reduce the chance of death, personal injury, fire and/or vehicle damage from overheated engines, never leave the engine idling without an alert driver present. If the en- gine should overheat, as indicated by the engine coolant temperature light, immediate action is required to correct the condition. Continued unattended operation of the engine, even for a short time, may result in serious engine damage or a fire.

Failure to comply may result in per- sonal injury, death, equipment or property damage. Fuses, circuit breakers, and relays are located in the Power Distribution Box to the left of the steering column behind the clutch pedal. Additional fuses are located in the engine compartment (drivers side bulkhead) and also in the sleeper under bunk storage compartment. 2 Check the coolant level after each trip when the engine has cooled. The coolant level should be visible within the surge tank—add coolant if necessary. See Topping Off on page 4-57 in , for instructions on checking and filling the coolant expansion tank. Do not remove the radiator fill cap while the engine is hot.

Scalding steam and fluid under pressure may escape. You could be badly burned. Failure to comply may result in death or personal injury. WARNING! 2-6 Y53-6076-1B1 (03/17)