VEHICLE RECOVERY AND SPRING BRAKES Recovery Rigging To connect to the vehicle, follow the suggested rigging methods below. Use a double chain or cable setup that distributes the load equally to both hitches. 2 Never loop a single chain or cable through both hitches. Use a spreader or equalizer bar to distribute the load on both hitches. If no spreader bar is available, connect the main tow chain or cable no closer than 6 ft. from the vehicle. 2. Connection to bumper via tow pin or hook 3. 2 or 3 piece tow device 1. Spreader Bar or Equalizer (03/17) Y53-6076-1B1 2-21