Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING leakage. 3 - 71 CHECK BEFORE STA Perform t he contents of t his section before st arting the work of each In norm al situations, do n ot open the radiator cap . When checking the coolant level, wait for the engin e to cool down and check using t he reserve tank. Immedi ately after the eng ine is stopped, the co olant is at high te mperature and the radiator is unde r high internal pressure. If you o pen the cap in this condition, you will suf fer burns. Alway s wait for the temperature to go dow n, turn the cap slowly to release the pressure, then remove the cap caref ully. 1.

Open the engine hoo d and check that the coolant in reservoir tank (1) is between th e FULL and LOW m arks. 2. If the level is LOW, re move cap (2) and ad d the engine co olant up to the FULL mark. 3. If the re is no coolant f the sa in the reservoir tan k, add Supercoolant (AF- radia top of NAC) o me density as the percoolant through Supercoolant i n the t the tor. Add the Su water filler (3) a the radiator, the n add Supercoolant to the reservoir tank. 4. Chec k that there is no oil in the engine coolant or any other em. adding coolant, tighten the cap securely. re coolant is added than normal, then check for water other probl 5. After adding coolant, tighten the cap secu 6.

If mo re coolant is ad ded than normal, t water