. SAFETY GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE EMERGENCY EXIT FROM OPERATOR'S CAB Machines equipped with a cab have doors on the left and right sides. If the door on the one side does not open, escape from the door on the other side. DO NOT GET CAUGHT IN ARTICULATING PORTION AND DUMP BODY If the clearance at the articulating portion changes and you get caught in it, you will suffer serious personal injury or death. Do not allow anyone to come inside the articulation range. The clearance in the area around the dump body changes according to the movement of the dump body. If you are caught, there is danger that you will suffer serious injury or death.
Do not allow anyone near any of the rotating or telescopic parts. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES The operator's compartment is equipped with a structure (such as ROPS, FOPS) to protect the operator by absorbing the impact energy. As for the machine equipped with ROPS, if the machine weight (mass) exceeds the certified value (shown on the ROLL-OVER PROTECTIVE STRUCTURE (ROPS) CERTIFICATION plate), ROPS will not be able to fulfill its function. Do not increase machine weight beyond the certified value by modifying the machine or by installing attachments to the machine.
Also, if the function of the protective equipment is impeded, the protective equipment will not be able to protect the operator, and the operator may suffer injury or death. Always observe the following. If the machine is equipped with a protective structure, do not remove the protective structure and carry out operations without it. If the protective structure is welded, or holes are drilled in it, or it is modified in any other way, its strength may drop. Consult your Komatsu distributor before carrying out any modifications.
If the protective structure is damaged or deformed by falling objects or by rolling over, its strength will be reduced and it will not be able to fulfill its function properly. In such cases, always contact your Komatsu distributor for advice on the method of repair. Even if the protective structure is installed, always fasten your seat belt properly when operating the machine. If you do not fasten your seatbelt properly, it cannot display its effect. UNAUTHORIZED MODIFICATION Komatsu will not be responsible for any injuries, accidents, product failures or other property damages resulting from modifications made without authorization from Komatsu.
Any modification made without authorization from Komatsu can create hazards. Before making a modification, consult your Komatsu distributor. Do not try to increase the capacity of the dump body or make any other modifications. Such modifications will cause a drop in the braking efficiency, the balance of the machine will become poor, and this may lead to an unexpected accident. 2 - 18