30. MACHINES READY FOR ATTACHMENT 30. MACHINES READY FOR ATTACHMENT WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER When the lock pin is set at the FREE position and the front or rear of the pedal is depressed, the attachment is actuated. Precautions when using Check that the stopper valve is in the FREE position. Check that the selector valve is in the position for using the general attachment such as crusher. For details of the path followed by the oil, see “30.2 HYDRAULIC CIRCUIT”. For details of other precautions when handling the breaker, read and use correctly the instruction manual provided by the breaker manufacturer.
Free AM092140 30.5 LONG TERM STORAGE If the machine is not to be used for a long time, do as follows. Set the stop valve in the LOCK condition. Install a blind plug to the valve. Set the selector valve to the “when not using” position. Set the lock pin at the LOCK position. If there is no breaker or general attachment installed, operating the pedal may cause overheating. 30.6 SPECIFICATIONS Hydraulic specifications Max. oil flow when merged: 500 ¬/min Relief set pressure of service valve safety valve: 27.47 MPa (280 kg/cm 2 , 3976 psi) Cracking pressure of service valve safety valve:
24.53 MPa (250 kg/cm 2 , 3550 psi) In addition, valves with a safety valve relief set pressure of 24.53 MPa (250 kg/cm 2 , 3550 psi) and safety valve cracking pressure of 20.11 MPa (205 kg/cm 2 , 2911 psi) are also available, so please contact your Komatsu distributor. 5-16