31. INTRODUCTION OF ATTACHMENTS 31. INTRODUCTION OF ATTACHMENTS 31.4 SELECTION OF BUCKET TEETH Depending on the working conditions, there is danger that the adapter and teeth may break, so select from the vertical pin teeth and horizontal pin teeth to give teeth that are suitable for the purpose. METHOD OF SELECTING TEETH Use of vertical pin tooth General digging: Digging, loading normal soil, such as sand, gravel, clay Light-duty digging: Digging, loading loose dry sandy soil or muddy soil. Loading: Loading dry loosened soil Use of horizontal pin tooth Heavy-duty digging:
Compacting, digging hard soil, soil mixed with rocks, heavy-duty work such as scraping The heavy-duty bucket is a horizontal pin tooth type, so use it for heavy-duty digging. Long-life teeth Jobsites where wear life is demanded, such as when loading hard rocks. Jobsites where no penetration is needed, such as when working with crushed rock after blasting or ripping. Jobsites where heavy-duty operations are carried out, such as hitting or pulling up rocks with the tips of the teeth. Self-sharpening teeth (horizontal pin type, vertical pin type) Jobsites demanding penetration such as digging and loading sandy or clayey soil.
Standards for selecting horizontal pin type and vertical pin type teeth 5-22 Appropriate work site Rock Crushed stone Clay, spread earth Sand Heavy contents ,../ Work Light Ground breaking excavation Lateral pin-type teeth Lateral pin-type teeth Vertical pin-type teeth Scraping down Lateral pin-type teeth Lateral pin-type teeth Vertical pin-type teeth General excavation Lateral pin-type teeth Vertical pin-type teeth Loading Lateral pin-type teeth Vertical pin-type teeth