Komatsu — 33.1 AUTO-GREASING CONTROLLER

33. AUTO-GREASING SYSTEM 33.1 AUTO-GREASING CONTROLLER WARNING If any abnormality occurs in the controller, see “34.2 ACTION WHEN ABNORMALITY OCCURS”, and please report the infor- mation to your Komatsu distributor and ask for repairs. When operating the controller, please consult your Komatsu distributor for advice. The auto-greasing controller is inside the door at the rear of the fuel tank. This controller carries out control of the auto-greasing system. AM092540 REMARK Even if the greasing controller or greasing pump suffers any damage and its function stops, greasing can be carried out from the divider valve (3 places) using a grease gun.

The greasing points for the auto-greasing controller are as shown in the diagram on the right. AM092550 Carry out greasing with the grease gun every 50 hours for the arm-link connection pin (1 point), arm-bucket connection pin (1 point), link connection pin (2 points), bucket cylinder rod end (1 point), bucket link connection pin (1 point). For details, see “33.4.1 GREASING”. 5-35