Komatsu — 33.3 CHECK BEFORE STARTING

33. AUTO-GREASING SYSTEM 33. AUTO-GREASING SYSTEM 33.3 CHECK BEFORE STARTING 33.3.1 CHECK AMOUNT OF GREASE IN GREASE CARTRIDGE FOR AUTOMATIC GREASING, REPLACE GREASE CARTRIDGE WARNING The tank has a built-in compressed spring, so be careful when installing or removing tank cover 1 . 1. Open the door at the rear of the operator’s cab, and check the height of grease cartridge 2 inside tank cover 1 . 2. If the height of grease cartridge 2 is lower than mark A on tank cover 1 , replace grease cartridge 2 with a new cartridge. METHOD OF REPLACING GREASE CARTRIDGE 1. Turn tank cover 1 to the left to remove it. 2. Turn empty grease cartridge 2 to the left to remove it. AM092700 3.

Remove cap 3 and plug 4 from the new grease cartridge. AM092710 4. Press the grease cartridge slightly so that grease comes out from the mouth, then screw the cartridge (approx. 5 turns) securely into suction port mouthpiece 5 . 5. Tighten tank cover 1 (approx. 1/3 turns) securely until the lock is engaged. NOTICE When changing the grease cartridge from the standard type to the cold area type, or from the cold area type to the standard type, please contact your Komatsu distributor. AM092720 5-37