OIL SYSTEM - DISASSEMBLY, INSPECTION AND REASSEMBLY 1. Oil Pump Inspecting the oil pump Check the oil pump for any damage, and whether or not it rotates smoothly. If faulty, replace the entire pump assembly. 2. Relief Valve Inspecting the relief valve (1) Inspect for proper valve-to-seat contact, spring fatigue, breakage or any other damage. If faulty, replace. (2) Measure the relief valve opening pressure (at rated engine speed). If the measured pressure exceeds the standard value, remove the cap nut and adjust by shimming. (3) Engine oil pressure port:
Right-hand side of engine Inspect for damage and smooth rotation Inspecting the oil pump Cap nut Shim Inspecting the relief valve 4 - 6 Relief valve opening pressure 0.35±0.05 MPa (3.5±0.5 kgf/cm2) [50±7.2 psi]