OIL SYSTEM - INSTALLATION 1. Oil Filter, Relief Valve and Oil Pressure Switch Tightening torque: 44.1 to 53.9 N m (4.5 to 5.5 kgf m) [32.5 to 39.8 lbf ft] Tightening torque: 10.8 to 12.7 N m (1.1 to 1.3 kgf m) [8.0 to 9.4 lbf ft] Tightening torque: 7.85 to 11.8 N m (0.8 to 1.2 kgf m) [5.8 to 8.7 lbf ft] Installation of the oil filter, relief valve and oil pressure switch 1.1 Installing the oil pressure switch (1) Using the special tool Oil Pressure Switch Socket Wrench, tighten the switch to the specified torque. MD998054 Tightening torque: 7.85 to 11.8 N m (0.8 to 1.2 kgf m) [5.8 to 8.7 lbf ft] (2) Apply sealant (ThreeBond 1102) onto the threaded portion of the switch. Apply sealant here.
Installing the oil pressure switch (a) Apply proper amount of sealant so that it will not be squeezed out to the tip of the threaded portion. (b) Do not overtighten. 4 - 10 Special tool Part num Oil Pressure Switch Socket Wrench MD9980