Mitsubishi — Mitsubishi Diesel Engine Service Manual

COOLING SYSTEM - DISASSEMBLY, INSPECTION AND REASSEMBLY 1. Thermostat 1.1 Disassembling the thermostat Replace: Gasket Disassembly of the thermostat ① Thermostat cover ② Gasket ③ Thermostat ④ Thermostat case 1.2 Inspecting the thermostat Place the thermostat in a container filled with water. While heating the water, measure the water temperature at which the thermostat starts to open, and also the water temperature at which the valve lift reaches 8 mm (0.315 in.). If the measured temperatures do not conform to the standard values, replace the thermostat. Unit: ( ° F ) Stir the water for even temperature Inspecting the thermostat This is a “hot” operation.

Pay every attention to prevent burns and fire. 5 - 6 Valve opening temperature 8 mm (0.315 in.) valve-lift temperature 82±1.5 (179.6±2.7) 95 (203)