COOLING SYSTEM - INSTALLATION 3. Cooling Fan, Fan Pulley and V-belt Installation of the cooling fan, fan pulley and V-belt Installing the cooling fan (1) Install the pulley onto the water pump. (2) Install the cooling fan onto the water pump pulley, and tighten the retaining bolts. (3) Loosen the alternator adjusting bolt. Attach the V-belt over the water pump pulley, alternator pulley, and crankshaft pulley. (4) Correctly tension the V-belt by moving the alternator and tightening the adjusting bolt. (5) Check the V-belt tension. V-belt tension {when pressed with a force of approx.
98 N (10 kgf) [22 lbf]} Installing the cooling fan 10 to 12 mm (0.4 to 0.5 in.) Adjusting bolt 10 to 12 mm (0.4 to 0.5 in.) Deflection of 10 to 12 mm (0.4 to 0.5 in.) {when pressed with a force of approx. 98 N (10 kgf) [22 lbf]} Adjusting the V-belt tension 5 - 12