Mitsubishi — Mitsubishi Diesel Engine Service Manual

INLET AND EXHAUST SYSTEMS - DISASSEMBLY, INSPECTION AND REASSEMBLY 1. Inlet Cover and Exhaust Manifold 1.1 Inspecting the inlet cover and exhaust manifold Cracks Cracks, Damage Cracks, Damage Inspecting the inlet cover and exhaust manifold 1.2 Measuring the exhaust manifold mounting face distortion Using a straight edge across the exhaust manifold mounting face and a thickness gauge, measure any distortion. If the measured distortion exceeds the limit, correct by grinding or replace the manifold. Unit: mm (in.) Limit Exhaust manifold mounting face distortion 0.15 (0.006) or less Thickness gauge Straight edge Measuring the exhaust manifold mounting face distortion 6 - 6