MISCELLANEOUS 1. Disassembly and Reassembly of General Parts 1.1 Oil seals When installing oil seals, pay particular attention to the following points. Installing oil seals into the housing (a) Check the seal, including for damage to the lip. When installing the seal, ensure that the lip faces the correct direction. (b) Before installing the seal, lightly coat the seal’s outer periphery (which contacts the housing) with grease. (c) Use a seal installer like the one illustrated that is designed to guide the seal lip as well as hold the outer face of the seal. Using such a tool, install the seal straight into the housing.
Do not try to tap the seal into place with a hammer or other similar tool as the seal can be damaged, resulting in oil leakage. Installing oil seals onto the shaft (a) Apply grease onto the seal lip. (b) When installing a seal onto a stepped, splined or threaded portion, or onto a surface with a key groove, use a guide like the one illustrated. 1.2 O-rings When installing an O-ring onto a stepped, splined or threaded portion, or onto a surface with a key groove, use a guide like the one illustrated. Before installation, lightly coat the O-ring with grease. Oil seal installer Oil seal guide O-ring guide 9 - 2