Mitsubishi — Mitsubishi Diesel Engine Service Manual

REMOVAL PREPARATIONS 1. Preparations 1.1 Removing the Electric Wiring Remove the wiring harnesses from the following equipment. Before removal, attach mating tags etc. onto the terminals to aid reassembly. Starter Switches 1.2 Draining the Coolant Loosen the coolant drain plug on the right-hand side face of the cylinder block to drain coolant from the engine. 1.3 Draining the Engine Oil Remove the engine oil drain plug from the oil pan to drain the engine oil. Install and tighten the drain plug to the specified torque. Oil pan capacity: 3.7 to 6.0 l (1.0 to 1.6 U.S.

gal) Starter Starter wiring Retaining bolt Removing the electric wiring Drain plug Coolant drain cock 34.3 to 44.1N 㨯 m (3.5 to 4.5kgf 㨯 m) [25.3 to 32.5 lbf 㨯 ft] Drain piug Tightening torqe: Do not touch the engine oil which may be extremely hot as it can cause burns. Drain plug on the oil pan 1 - 30