8. LOADER CYLINDER DRIFT TEST 8. LOADER CYLINDER DRIFT TEST В SPECIFICATION SPECIFICATION Oil temperature 45 Ь 5 C (113 Ь 9 F) Boom horizontal Bucket horizontal Bucket unloaded B A B 侏 HL940TM HL940TM A В GAUGE AND TOOL GAUGE AND TOOL Stop watch Temperature reader Put the safety lock lever in the lock position. Do not go under the work equipment. A : Retraction of boom cylinder rod B : Retraction of bucket cylinder rod 1) Set the boom and bucket horizontal, then stop the engine. 2) Stop the engine, wait for 5 minutes, then start measuring. 3) Measure the amount the boom and bucket cylinder rods retract during 5 minutes.
7577AWE31 6-62 Item Standard value Retraction of boom cylinder rod 8 mm Retraction of bucket cylinder rod 13 mm 侏15mm