4 EBU18080 Engine stop switch “ / Set this switch to “ ” before starting the engine. The engine stop switch controls the ignition and stops the engine when it is running. Use this switch to stop the engine in an emergency situation. The engine will not start or run when this switch is set to “ EBU18060 Handlebar switches 1. Light switch “ / /OFF” 2. Engine stop switch “ / 3. Start switch “ 4-4 If the ATV runs out of fuel, move the fuel cock lever to the “RES” position. Approximately 4.5 L (1.19 US gal) (0.99 Imp.gal) of fuel will be remaining in 1. Fuel gauge 2. Red line NOTE: the tank.