Komatsu — HANDLING THE ACCUMULATOR

OPERATION SWITCHES HANDLING THE ACCUMULATOR After stopping the engine, always place the control lever pad safety lock in the LOCK position and lock the attachment control pedal with the lock pin. The accumulators are filled with high-pressure nitrogen gas, and it is extremely dangerous if they are handled in the wrong way. Always observe the following precautions. Never make any hole in the accumulators or expose them to flame or fire. Do not weld any boss to the accumulators. When disposing of the accumulators, it is necessary to re lease the gas from the accumulators, so please con- tact your Komatsu distributor.

Brake circuit accumulators This machine is equipped with the accumulator in the brake cir- cuits. The accumulator is a device to store the pressure in the circuit, and when it is installed, the circuit can be operated for a short time even after the engine is stopped. The accumulators are installed to the position shown in the dia- gram on the right. Control circuit accumulator This machine is equipped with the accumulator in the control cir- cuit. The accumulator is a device to store the pressure in the con- trol circuit, and when it is installed, the control circuit can be operated for a short time even after the engine is stopped.

There- fore, if the control lever is moved in the direction to lower the work equipment, it is possible for the work equipment to move under its own weight. The accumulator is installed to the position shown in the diagram on the right. 103 WARNING