Komatsu — ADJUSTMENT BEFORE OPERATION OPERATOR’S SEAT

OPERATION OPERATION NOTICE Do not over tighten the valve. Over tightening can dam- age the threads. ADJUSTMENT BEFORE OPERATION OPERA- TOR’S SEAT (A) Fore-and-aft adjustment of seat Pull lever (1) up. After the seat is set to the desired position, release the lever. NOTE: This operation will not affect relative position of seat and wrist control levers. (B) Forward/aft adjustment of seat Pull lever (2) up. After the seat is set to the desired position release the lever. NOTE: This operation will affect relative position of seat and wrist control levers. (C) Adjustment of reclining seat Pull lever (3) up after the seat back is set to the optimum position for easy operation, release the lever.

(D) Adjustment of arm rest height Turn thumb wheel (4) to adjust armrest to comfortable height. (E) Adjustment of tilting seat angle Lift lever (4) to alter seat angle. Release lever when seat is in required position (F) Suspension adjustment When knob (6) is turned clockwise, the suspension becomes harder and when turned anti-clockwise, softer. Adjust the dial so that the suspension best matching the operator’s weight is selected. 110