OPERATION OPERATION Set the control lever to the neutral position. When starting the engine, never touch the knob button. 3. Insert the key in starting switch (2), turn the key to the ON position, then carry out the following checks. AM090710A The buzzer will sound for approx. 1 sec., and the following moni- tors and gauges will light up for approx. 3 sec.
Radiator water level monitor (3) Engine oil level monitor (4) Hydraulic oil level monitor (5) Charge level monitor (6) Fuel level monitor (7) AD313610A Engine water temperature monitor (8) Engine oil pressure monitor (9) Engine water temperature gauge (10) Fuel gauge (11) Engine pre-heating monitor (12) Air cleaner clogging monitor (13) Swing lock monitor (14) Replacement monitor of engine oil (15) If the monitors or gauges do not light up or the buzzer does not sound, there is probably a broken bulb or disconnection in the monitor wiring, so contact your Komatsu distributor for repairs. After approx. 3 sec., the following gauges will remain on and the other monitors will go out.
Engine water temperature gauge (10) Fuel gauge (11) (2) Press lamp switch (14) to turn on the work lamps. A warning lamp on the steering column will illuminate. If the lamps do not light up, there is probably a broken bulb or dis- connection in the wiring, so contact your Komatsu distributor for repairs. 112