OPERATION OPERATION REMARK If the above operation is not carried out, there may be a delay in response when starting or stopping each actuator, so continue the operation until it becomes normal. 9. Use working mode switch (2) on the monitor panel to switch to the working mode to be used. NOTICE Cancelling automatic warming-up operation If it becomes necessary in an emergency to lower the engine speed to low idling, cancel the automatic warming-up opera- tion as follows. H/O G/O F/O L/O B/O H M AD157770A 1. Turn fuel control dial (1) to the full speed (MAX) position and hold it for 3 seconds. AM090500A 2.
When fuel control dial (1) is returned to the low idling (MIN) position, the engine speed will drop. MIN Low idling AN113900A 121