Komatsu — TRAVELLING POSTURE

TRANSPORTATION OPERATION TRAVELLING POSTURE Before starting to travel, be sure to pull in and lock the outriggers, and/or raise the dozer blade. Before travelling on public roads, the work equipment should be positioned as follows. 1. Position the upper structure so that it is facing the front of the undercarriage (the oscillation lock cylinders can be seen) and insert the swing lock pin. 2. Fully extend the bucket cylinder. 3. Fully extend the first boom cylinders. 4. Fully extract the second boom cylinders. 5. Adjust the arm cylinder such that the boom and arm pointers are aligned. 6. Disable the work equipment levers by moving the control lever pad safety lock to the locked position.

Green zone Red zone 7. Close manual lock valves 1) For the bucket cylinder, located on the arm. 2) For the arm cylinder, located on the first boom. After setting the machine in the travelling posture, confirm that its overall height is below 4m and that the distance between the cen- tre of the steering wheel and the front of the work equipment is less than 3.5 m. Before moving off, lock all machine cover and toolbox doors to prevent accidental opening. 152