Komatsu — PRECAUTIONS ON PARTICULAR JOBSITES

OPERATION TROUBLESHOOTING METHOD OF TOWING MACHINE When towing the machine, use a wire rope that has ample strength for the weight of the machine that is being towed. If the machine sinks in mud and cannot get out under its own power, or if the drawbar pull of the excavator is being used to tow a heavy object, use a wire rope as shown in the diagram. WHEN USING THE FRONT OF CHASSIS WHEN USING THE REAR OF THE CHASSIS PRECAUTIONS ON PARTICULAR JOBSITES 1. When carrying out digging operations in water, if the work equipment mounting pin goes into the water, carry out greas- ing every time the operation is carried out. 2.

For heavy-duty operations and deep digging, carry out greas- ing of the work equipment mounting pins every time before operation. 3. After greasing, operate the boom, arm and bucket several times, then grease again. 159 WARNING