MAINTENANCE. OUTLINES OF SERVICE When carrying out inspection or maintenance of the hydraulic circuit, always bleed the air from the hydraulic tank to remove the internal pressure. Periodic maintenance includes the inspection of the hydraulic oil level, replacement of the filter and refilling of hydraulic oil. When the high pressure hose, etc. is removed, check the O- ring for damage. If necessary, replace it. After the hydraulic filter element and strainer are cleaned or replaced, or after the hydraulic system is repaired or replaced or the hydraulic piping is removed, bleed air from the hydrau- lic circuit. The accumulators are charged with high-pressure nitrogen gas.
Incorrect handling may be dangerous. For the handling procedure, see “HANDLING ACCUMU- LATOR” on page 250. 175