USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE MAINTENANCE. Use API classification CE or CF-4 as engine oil. If API classi- fication CD is used reduce the engine oil change interval to half. There is no problem if single grade oil is mixed with multi- grade oil (SAE10W-30, 15W-40), but be sure to add single grade oil that matches the temperature in the table. We recommend Komatsu genuine oil which has been specifi- cally formulated and approved for use in engine and hydraulic work equipment applications. When fuel sulphur content is less than 0.5%, change oil in the oil pan every periodic maintenance hours described in this manual.
Change oil according to the following table if fuel sulphur con- tent is above 0.5%. Specified capacity: Total amount of oil including oil for compo- nents and oil in piping. Refill capacity: Amount of oil needed to refill system during nor- mal inspection and maintenance. Abbreviations: ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers API:
American Petroleum Institute 178 SPECTRUM XXX KOMATSU GENUINE LUBRICANTS YPE CLASS VISCOSITY REF.NO ngine oil CF - 4 CF - 4 SAE15W - 40 SAE10W - 30 EO - 1540 EO - 1030 RANSMISSION OIL CD SAE10W TO - 10 GEAR BOX OIL CD CD CD SAE10W SAE30 SAE50 STO - 10 HEAVY DUTY TO - 30 TO - 50 YDRAULIC OIL CD SAE10W HO - 10 IO HYDRAULIC OIL SAE10W BO - 10 REASE LG - N2 IO GREASE BIO - R2 NTI FREEZE AF - 03 IO ANTI FREEZE BIO - AF - 0 Fuel sulphur content I Change interval of oil in engine oil pan 0.5 to 1.0% 1/2 of regular interval 1.0% to 1.5% 1/4 of regular interval