OPTIONS, ATTACHMENTS GENERAL PRECAUTIONS PRECAUTIONS WHEN INSTALLING ATTACHMENTS Long work equipment reduces the stability of the chas- sis, so if the swing is operated on a slope, or when going down a steep hill, the machine may lose its balance and overturn. The following operations are particularly dan- gerous, so never operate the machine in these ways.
Going downhill with the work equipment raised Traveling across slopes INCORRECT CORRECT Swinging the upper structure on slopes If heavy work equipment is installed, the overrun of the swing becomes greater (the distance from the point where the operator operates the control levers to stop the swing to the point where the upper structure stops completely), so there is danger of mistaking the distance and hitting something. Always operate so that there is an ample margin to the stopping point. Furthermore, the hydraulic drift also becomes larger when the work equipment is stopped in mid-air, it will gradually move down under its own weight).
INCORRECT CORRECT Platform Always follow the correct procedure when installing the boom and arm. If the correct procedure is not followed, this may lead to serious damage or injury, so please con- sult your Komatsu distributor before carrying out instal- lation. If long work equipment is installed, the working range will suddenly become larger, so there is danger of mis- taking the distance and hitting something. Always operate the work equipment so that there is ample space from any obstacles in the area 243 WARNING