Komatsu — EXCAVATOR’S WORK

OPTIONS, ATTACHMENTS INTRODUCTION OF ATTACHMENTS AND EXTENDING MACHINE SERVICE LIFE UPPER BOOM CONTROL PEDAL This is used to operate the upper boom. NEUTRAL: The upper boom is stopped and held in the same position. Do not rest your food on the pedal unless using the pedal. PEDAL LOCK FOR BOOM ADJUST 1. With the pedal in the neutral position screw in the pin to lock the pedal. 2. Screw out the pin to unlock the pedal. When the machine is stopped, when leaving the machine or when carrying out maintenance, always lock the boom adjustand arm rotation pedal. EXCAVATOR’S WORK In addition to the following, it is possible to further increase the range of applications by using various attachments.

BACK HOE WORK A back hoe is suitable for excavation at a position lower the machine.It is possible to effectively move the arm through 30° in the direction towards the machine and 45° in the direction away from the machine, making for efficient work. SHOVEL WORK A shovel is suitable for excavating at a position higher than the machine. LOADING WORK About half of the time spent during excavating and loading work is taken up by swinging. Maximum work efficiency can be attained by carrying out work is such a way that the swinging angle is kept as small as possible in accordance with the terrain. 267 (1) RAISE: Pedal pushed forward (2) LOWER: Pedal pushed back CAUTIO N CAUTIO N